Acad Short Note

Name	Command	Description
Line	L OR LINE	To draw line
Circle	C	To draw circle
Rectangle	REC	To draw circle
Ellipse	EL	To draw ellipse
Construction line	XL	To draw infinite lines
Ray	RAY	To draw semi infinity lines
Polygon	POL	To draw polygon
Arc	A	To draw arc.
Zoom	Z	To zoom drawings
Pan	P	To shift the drawing view. (click on the scroll button)
Undo	U	Undoing the mistakes (out from wrong done)
Units	UN	To set the unit types and co-ordinates
Mvsetup	MVSETUP	To set the unit and drawing area
Snap	CTRL+F9	To control movement of cursor in the fixed interval (To edit opposite click on the status bar and then on the Snap/Grid setting.)
Grid	CTRL+F7	To display the grid or to display the snap points.
Draft Setting	DS	To open the Draft settings dialog box. Eg. Snap/Grid, ortho, polar, osnap. Otrack etc.
Limits	LIMITS	To set the drawing area or the grid display area
Redraw	R	To redraw the all drawing
Regeneration	RE	To regenerate the view. (To show grid well)
Ortho	CTRL+F8	To convert the drawing in the perpendicular mode. (only permit to move on 900 multiple.
Polar tracking	CTRL + F10	To eligible the track lines in the more angles
Object Snap	OSANP (CTRL+F3)	To give the object magnetic behavior
Object tracking	OTRACK (CRTL+F11)	To eligible the track line from the object points. (Easy to find the unknown points)
Line weight	LWT	To display the line weight as assigned in the drawing.
Arial View	AV	To see the drawing in the dynamic way.
Move	M	To move object form one place to other
Copy	CO OR CP	To copy the object
Rotating	RO	To rotate the object
Scale	SC	Scale the object in the required multiplication
Stretch	S	Stretch the object in the unique direction
Lengthening	LEN	To Lengthen the line according as is length, percentage, and increment or decrement.
Array	AR	To copy objects in the Systematic way.
Mirror	MI	Mirror object
Offset	O	Draw the similar object in the particular distance.
Explode	X	Break down objects in to the number of its ingredient components
Trim	TR	To cut off the lines or object according as its boundary
Extend	EX	Extend the lines to a specific boundary
Breaking	BR	Cut of the object portion
Extrim	EXTRIM	To cut all the object on one side passing through it.
Fillet	F	Join the corner by the arc
Chamfer	CHA	Join the corner by the line
Polyline	PL	Draw the lines joined end to end
Poly line edit	PEDIT	Modify the ployline
Region	REGION	Create the region
Identify	ID	Give co-ordinates of the location
Distance	DI	To measure the distance between two points
Area	AA	Calculate the area and perimeter on the boundary as given points
Calculator	CAL	Calculate the expression. Eg. Sum, trigonometric etc.
Points	PO	Polt the points
Change point types	DDPTYPE	Change the current point style types
Color	COL	Change the current object type.
Lint Type	LT	Change the current line types.
Line weight	LW	Change the current line weight
Layers	LA	To open the Layer prop. Manager dialog box. To create, modify the layers
Single line text	DT	To type the single line text
Multi line text	MT OR T	To type the multi line text
Edit text	ED OR DDEDIT	To change the text of the multi line of single line
Spelling	SPELL	To check the spelling of the text
Find and Replace	FIND	Find and Replace the text typed.
Arc align text	ARCTEXT	Align the text as arc.
Mirror to text	MIRRTEXT	Eligible the text also to be mirrored
Dimension style	D	To create, modify and override the dimension style
Text style	STYLE	To create and modify the text style
Linear Dimension	DLI	Assign the linear dimension to the object. (Delta X of Delta Y)
Aligned Dim	DAL	Assign the aligned dimension to the object. (Length of the two points)
Arc length	DAR	Assign the length to the Arc
Ordinate	DOR	Assign the ordinates of the points
Radius	DRA	Assign the radius of the arc or circle
Diameter	DDI	Assign the diameter of the Circle
Center mark	DCE	To mark the center of the arc, circle or ellipse
Angle	DAN	To measure the angle between the lines
Baseline dim	DBA	Assign the base line dimension types to the object
Continue Dim	DCO	Assign the continued dimension types to the object
Leader	LD	Indicate the object by its properties with arrow
Oblique dim text	DED	Change the text alignment of the dimension
Quick dimension	QDIM	Assign fast dimension to the objects
Hatch	H	Assign the Hatch to the object or inside boundary
Superhatch	SUPERHATCH	To make your own hatch pattern easily
Blip Mode	BLIPMODE	Mark the points just click
View Resolution	VIEWERS	Set the resolution of the drawing
Freehand Sketch	SKETCH	Draw the lines as the mouse cursor moves
Join the sketch line	SKPOLY	To make one to the Freehand sketch lines
Special lines	SPLINE (SPL)	To draw the curves
Spline Edit	SPE	To edit the spline. Eg. Add vertices, moves etc.
Multi lines	ML	To draw the multi lines
Multi line style	MLSTYLE	Create the multi lines styles
Multi lines edit	MLEDIT	To edit the multi lines corners, joins and vertices.1
Blocks	B	To create the block or to group the object to make a one.
Inserts	I	To insert the blocks
Purge	PURGE	To remove the unnecessary blocks, styles and layouts from the drawing
Block edit	BEDIT	To redefining the block and give it the dynamic characteristics.
Divide	DIV	To divide the object into the specified numbers by points
Script	SCR	To load the scripts files.
Make slide	MSLIDE	Make a current view as a slide
View slide	VSLIDE	View the created slide
Plot	CTRL+P	To print the object
Page setup	FILE>PAGE SETUP	To select the printing type and others properties
Make view	MV OR MVIEW	Create the new view in the layout tab.
View port	VPORT	Divide the current model tab into number of view ports or working area
Properties	CTRL + 1	To see and modify the properties of the object
Design Center	CTRL + 2	Copied the blocks, styles, tables and layout form the others files
Make attributes	ATT	To make the attributes. ( The object with the text properties)
Filter	FILTER	To filter the object form the drawing with the defined conditions
Express Tools		The Plus command to the AutoCAD for the easy ness and fast drawing.
Helix	Helix	To draw the helix.
Creating line	-lt	To create the line of your own types
Pick First	Pickfirst	To enable the multiple selection
-toolbar	-toolbar	To show and hide the toolbars
UCS	UCS	To modify the user co-ordinate system setting and position
Ucsicon	Ucsicon	To enable/disable the ucs icon
Box	Box	To create the box
Cone	Cone	To Create Cone
Sphere	Sphere	To Create Sphere
Wedge
Cylinder	Cyl
Polysolid		To Create a Wall like Objects with the fixed height and wide
Torous
Pyramid
Helix
Planesurface	Planesurf
Extrude	Ext	To Convert 2D Closed or Unclosed object into Solid and Surfaces respectively
Sweep		To Void the Solid with the certain thickness
Presspull		To Pull Up the Object interior area into solid
Revolve	Rev	To revolve the object with respect to axis
Loft	Loft	To make objects with its different section.
Substract	Su	To remove object form the Touched Object
Union	Uni	To unite the objects into One
Intersection		Remains only the combined parts of the object
Surftab	Sufttab1/ Surftab2	To change the latitude and longitude lines numbers of surfaces
Tabsurf		To develop surface in certain path
RuleSurf		To develop the surface with two end sections
Revsurf		To create circular surface
Mirror3D		Mirror the object into any axis, 2D or 3D
3DMove	3M
3DRotate	3R
3DArray	3A
Align	Al	To transform objects with respect to 3 common points
SolidEdit		To initialized the solid editing command
Slice		To Cut a portion of solid with respect to plane or section
Section		To view section of objects
Vports		To view multiple views at a time in a Acad window
Render	Rr	To give the realistic view as material, light and landscapes assigned to the objects
Material Library	Rmat	To open the Material library, so that we can create, assign or remove material property to Acad objects.
Section Plane	Sectionplane	To view the Section of 3D drawing

 

Note: There are many others command used in AutoCAD, for which you can know it from AutoCAD help, by pressing F1.

Hope this commands will be helpful to you.